DuoPop Users Guide.

Set-Up

  • Remove lid
  • Unplug microphones and remove inner battery box
  • Insert 9V battery using correct orientation
  • Ensure the central output lead is passing through the hole in the outer shell
  • Plug the microphones back into the microphone connector leads
  • Replace the battery box to its original position
  • Replace the lid (optional) the output lead may now be plugged into your camera or sound recorder
  • Remove the 9V battery between recording sessions

Using the Microphones Outside of the Silicone Ears. 

  • Carefully push each microphone into the ear (push on the outer rim of the microphone capsule) until it becomes free inside the shell
  • Do not pull them through from the inside
  • Remove the battery box, ensuring the output lead is free to move through the hole in the shell
  • Plug the output lead into your sound recorder or camera
  • Insert 9V battery using correct orientation

Taking Care of Your DuoPop

  • Remove battery between uses to conserve battery life
  • Clean outer shell with a damp cloth and mild detergents, if necessary
  • Do not submerge any of the unit in any liquid (the ears may be removed from the shell and submerged in water for cleaning, if necessary)
  • Do not leave in direct sunlight for prolonged periods
  • Do not expose to temperatures over 50°C /120°F

Here is a guide on swapping and cleaning the Silicone Ears.

If you have any questions about the use of your DuoPop and they weren't covered in this guide, let us know below!

Name *
Name